Need help?Do you have a question about the Felder FB 510 and is the answer not in the manual?
Explains symbols used in the manual for safety and operational instructions.
Details how to use the manual and its importance as part of the machine.
Covers manufacturer liability, warranty terms, and copyright of the manual.
Outlines copyright protection and restrictions on using the manual's content.
Provides information on the guarantee period and where to find details.
Specifies required information for ordering genuine FELDER spare parts.
Instructions for separating materials and disposing of the machine responsibly.
Defines the proper and intended uses of the bandsaw for safe operation.
Emphasizes reading and understanding the manual for safe operation.
Prohibits unauthorized modifications to the machine to maintain safety.
Outlines operator duties for safe machine operation and maintenance.
Specifies requirements for authorized and trained personnel operating the machine.
Provides advice to prevent bodily injury and material damage during work.
Details required PPE such as protective clothing, footwear, and hearing protection.
Identifies machine hazards, especially electric current risks and precautions.
Highlights other risks like hearing damage and health impairments from dust.
Declares conformity with EC health and safety requirements, listing applied guidelines.
Provides detailed dimensions and net weight for FB 510, 610, and 710 models.
Details motor voltage, frequency, system of protection, and power for different models.
Lists sound power and workplace emission values, with notes on influencing factors.
States compliance with dust reduction standards and maximum dust concentration levels.
Specifies connection requirements, air speed, and hose types for dust extraction systems.
Provides an illustrated overview of machine parts and their labels for assembly.
Details the information found on the machine's data plate, including model and power.
Describes the maintenance-free DC braking unit and contact for service.
Explains the mechanical brake system for USA models, including wear and maintenance.
Emphasizes safety for assembly, installation, and electrical connections.
Lists requirements for the installation site, including space, stability, and lighting.
Provides instructions and warnings for safely transporting the machine.
Details the procedure for removing the table insert and mounting the work table.
Explains how to position and level the machine for precise and smooth operation.
Details electrical connection requirements, safeguarding, and checks before operation.
Covers safety before, during, and after operation, including dress code and precautions.
Guides on choosing the correct saw blade and its maintenance for optimal cutting.
Step-by-step guide for replacing and properly tensioning the saw blade.
Describes the plastic table pad and wooden pad for dust extraction and their adjustment.
Details on adjusting the height of the protection device and blade guides for optimal cutting.
Instructions for safely switching the bandsaw on and off, and important operational notes.
Details permitted work techniques for cuts, including rip cuts and safety notes.
Explains how to tilt the working table to different angles for various cuts.
Details how to adjust the variable cutting speed using the control panel.
Safety precautions to be observed before and during any maintenance work.
Instructions on checking, tightening, and replacing the drive belt for optimal power transmission.
Guide for replacing the rubber wearing surfaces on the machine wheels.
Details on cleaning dust deposits and resin, and the importance of not greasing parts.
Explains how to check and correct cut direction and parallelism, and adjust the fence plate.
Details on adjusting lubricant flow, soaking felt cubes, and their exchange.
Instructions for checking and replacing worn flywheel wipers.
Safety precautions for repairing faults, emphasizing qualified personnel and electrical safety.
Guides on immediate actions when a fault occurs, including shutdown and reporting.
Steps to take after rectifying a fault, ensuring safety equipment is functional and area is clear.
A table listing common faults, their causes, and suggested repair methods.
Lists error codes related to speed control and their causes and solutions.
Provides notes on using electrical diagrams and ordering spare parts from catalogues.
To Next Page
General
