Need help?Do you have a question about the Felder CF 741 and is the answer not in the manual?
General| Table Size | 950 x 275 mm |
|---|---|
| Frequency | 50 Hz |
| Type | Combination machine |
| Motor Power S1 | 3 kW |
| Motor Power S6 | 4 kW |
| Saw Blade Diameter | 250 mm |
| Crosscut Fence | 1100 mm |
| Motor Power | 3 kW (S1), 4 kW (S6) |
| Voltage | 400 V |
Details on warranty conditions and claims.
Essential instructions for safe and efficient machine operation.
Requirements for connecting the machine to the electrical supply.
Instructions for initial setup and startup of the machine.
Information on the machine's electrical connections and safety.
Crucial safety precautions for operating the shaper.
Detailed instructions for operating the shaper unit.
Instructions for operating the sliding table assembly.
To Next Page
