Need help?Do you have a question about the Felder FB 610 and is the answer not in the manual?
General| Model | FB 610 |
|---|---|
| Table Size | 610 x 610 mm |
| Weight | 390 kg |
| Saw Table Size | 610 x 610 mm |
| Motor Power | 3.0 kW (4.0 HP) or 4.0 kW (5.5 HP) |
Defines the correct applications for the bandsaw and specifies prohibited uses.
Strictly prohibits any alterations to the machine without manufacturer consent.
Lists essential PPE, including protective clothing, footwear, and hearing protection.
Details specific hazards, particularly those related to electrical current and machine operation.
Critical safety guidelines that must be followed during machine setup and installation.
Guidance on accurately positioning and levelling the bandsaw for optimal performance.
Detailed instructions for safely and correctly connecting the machine to the power supply.
Essential safety measures to observe before and during machine operation.
Guidance on choosing the appropriate saw blade and its routine maintenance.
Step-by-step instructions for changing and properly tensioning the saw blade.
Instructions for adjusting the height and alignment of the saw blade guides.
Correct steps for safely switching the bandsaw on and off.
Crucial safety precautions to be observed before starting any service or maintenance work.
Procedure for checking drive belt tension, tightening, and replacing it.
Instructions for adjusting the saw blade lubrication flow and replacing felt cubes.
Safety guidelines for personnel performing fault diagnosis and repair.
A comprehensive table detailing common faults, their root causes, and recommended repairs.
Guide to interpreting and resolving error messages related to the speed control system.
To Next Page
