Need help?Do you have a question about the Felder FB 540 and is the answer not in the manual?
Explains symbols used for safety and provides guidance on manual usage and care.
Outlines copyright protection, usage restrictions, and manufacturer liability.
Details warranty terms, ordering spare parts, and proper disposal procedures.
Defines the machine's intended purpose and stresses the importance of understanding the manual.
Emphasizes reading the manual and outlines operator responsibilities for safe machine use.
Prohibits unauthorized modifications and details operator responsibilities and personnel requirements.
Covers general work safety, accident prevention, and adherence to regulations.
Details required personal protective equipment and identifies machine-related hazards and other risks.
Details machine dimensions, operating conditions, and electrical connection requirements.
Provides noise emission values for different models and advice on minimizing noise.
Details requirements for dust extraction connection, air speed, and hose types.
Provides an overview of the machine's main components with numbered labels.
Explains the information found on the machine's data plate for identification and specifications.
Lists crucial safety instructions for machine assembly and installation to prevent injury or damage.
Specifies site requirements, including space, lighting, and stability for optimal installation.
Provides important points for correct and efficient machine installation, including handling and placement.
Essential safety guidelines to follow before, during, and after operating the machine.
Explains the procedure for switching on the bandsaw for different models.
Defines authorized work techniques, stating that deviations are not intended or permitted.
Describes the technique for performing a longitudinal cut along a marked line.
Explains cutting round workpieces transversely and thin workpieces longitudinally.
Describes safely guiding workpieces when cutting them on their upright edge.
Instructs on performing angular, circular, and diagonal cross-cuts using auxiliary equipment.
Guides on selecting saw blades based on cut type and material, and lists applications.
Provides step-by-step instructions for mounting and adjusting the saw belt.
Explains how to adjust the saw blade guides for optimal cutting performance.
Details adjustment of the protection device and upper/lower saw blade guides.
Explains table pad function and addresses cut parallelism issues with adjustments.
Describes table tilting and introduces the electromechanical brake system and its maintenance.
Details brake system maintenance, replacement of parts, and air gap adjustment procedures.
Lists safety precautions for maintenance and covers checking drive belts for tension and condition.
Details procedures for replacing the V-belt and disassembling the upper wheel.
Covers replacing the upper wheel's rubber surface and guidelines for cleaning and lubrication.
Emphasizes safety during fault diagnosis, outlines actions when faults occur, and post-rectification checks.
Lists common machine faults, their causes, and recommended problem elimination steps.
Lists component keys for the FB 540/640 and FB 740/840/940 circuit diagrams.
Presents the detailed electrical circuit diagram for the FB 540/640 3P+N bandsaw model.
Shows the electrical circuit diagram for the FB 540/640 2P+N bandsaw model.
Displays the electrical circuit diagram for the FB 740/840/940 bandsaw models.
To Next Page
General
