Need help?Do you have a question about the Felder FB 710 and is the answer not in the manual?
Defines the machine's purpose (sawing wood) and restrictions on materials and usage.
Prohibits unauthorized modifications and stresses keeping safety labels visible and intact.
Outlines operator duties regarding manual accessibility, machine condition, safety regulations, and personnel supervision.
Specifies requirements for personnel, including authorization, training, and refraining from hazardous activities.
Highlights how following safety advice prevents injury and damage, and disclaims liability for non-compliance.
Lists required PPE like protective clothing, footwear, and hearing protection for safe operation.
Details risks like electric shock from damaged insulation or components, and emphasizes safety device integrity.
Crucial safety warnings regarding improper assembly, electrical work, and machine integrity.
Details how to position and level the machine using adjusting screws for precise and smooth operation.
Covers electrical connection requirements, safeguarding, power supply, and checks after connection.
Emphasizes safety for authorized personnel, pre-operation checks, and during-operation procedures.
Guides on choosing the correct saw blade type and width based on material and cut, and maintenance.
Step-by-step instructions for replacing and tensioning the saw blade, including safety precautions.
Covers adjusting the height of the protection device and the up/down position of the saw blade guide.
Details the procedure for turning the machine on and off, including safety interlocks.
Crucial safety warnings for performing maintenance and setup work on the machine.
Critical safety warnings for repairing faults, emphasizing qualified personnel and observance of instructions.
To Next Page
General
