Felder FB 710 - Mitre Cuts; Circular Cuts; Diagonal Cross-Cut of Rectangular Workpieces

27
Bandsaw
FB 510/610/710 & FB 710 c-tech
7.7.5 Mitre cuts
Use auxiliary equipment as depicted in the figure.
Fig. 7-12: Mitre cuts
Fig. 7-13: Circular cuts
Use auxiliary equipment as depicted in the figure.
Fig. 7-14: Cross cut
7.7.6 Circular cuts
7.7.7 Diagonal cross-cut of rectangular workpieces
Use auxiliary equipment as depicted in the figure.
Accessories Order no.:
01.1.300
Operation