felfil evo - Understanding the Display Readings

Complete Kit Manual
36
User Interface 2
Current Temperature:
indicates the current
temperature in the
chamber.
Arrow:
switch between
2 functions:
- set temperature
-set engine rpm
Electrical Absorption
Indicates the electrical current
absorbed by gearmotor in
Amperes.
Felfil Evo automatically cut off the
power when the absorption is over
1,8A.
Set Temperature:
indicates the temperature
the PID is heading for.
Engine speed:
indicates the set engine rpm:
you can set this value from 0
to 9.
6 rpm is a quite safe and
efficient value.
This is the user interface when Felfil Evo is running.
The LCD contains all information about the extruding.
Keep pressed the knob in order to reset all settings.