Fellowes AP-230PH - Page 10

4.Placethenewltersinthemainunit.
(TrueHEPAFiltershouldalwaysbe
insertedrst,thentheCarbonlter.)
5.ToresetthelterlightonceanewTrue
HEPAand/orCarbonFilterisinstalled:
 a.Plugtheunitbackinwiththefront
 coveroff.
 b. Turnontheunit.
 c. Locatethelterreplacementbutton
 onthedisplaypanel.
 d. Tochoosewhichlterlighttoreset,
 pressthelterreplacementbutton
 for1secondatatimetotoggle
 betweentheTrueHEPAandCarbon
 Filtericons.
 e.Pressandholdthelterreplacement
 buttonfor3-5seconds.Ashortbeep
 willbeheardandthelightshould
 turnoff.
 f. Placethefrontpanelontheunitand
 theairpurierisreadytouse.
Air Quality Sensor Cleaning
Lightlyvacuumtheairqualitysensorevery
twomonthsafterremovingthefrontpanel.
10
AP-230-300PH_ 869215_3L_RevB_061412.indd 10 6/18/12 4:48 PM