How to turn on Fellowes Laminator if there is no ‘red’ power on LED?
If the ‘red’ power LED on your Fellowes Laminator isn't lit, the machine might not be switched on. Make sure to switch on the machine at the rear next to the plug inlet and at the wall socket.
What to do if the 'green' ready light doesn't turn on after a long time on my Fellowes Laminator?
If the ‘green’ ready light on your Fellowes Laminator does not turn on after a long period, it might be because the machine is in a hot or humid area. Try moving the laminator to a cooler and drier location.
Details on entry width, binding capacity, heat-up time, cool down time, and ready indication.
Specifications including voltage, wattage, dimensions, and net weight.
Describes the machine's self-diagnostic check upon startup.
Explains the document clamp's role in preventing contact with the heating plate.
Details the automatic power-down feature after 30 minutes of inactivity.
Details on entry width, binding capacity, heat-up time, cool down time, and ready indication.
Specifications including voltage, wattage, dimensions, and net weight.
Describes the machine's self-diagnostic check upon startup.
Explains the document clamp's role in preventing contact with the heating plate.
Details the automatic power-down feature after 30 minutes of inactivity.
General| Product color | Graphite |
|---|---|
| Binding capacity | 300 sheets |
| Binding time (max) | 180 s |
Weight and Dimensions| Weight | 2900 g |
|---|---|
| Dimensions (WxDxH) | 532 x 232 x 82 mm |
To Next Page
