Fellowes POWERSHRED 225Mi - Basic Shredding Operation; Advanced Product Features; 100% Jam Proof System; SafeSense Technology Operation

3
*100% Jam Proof when used in accordance with user manual
BASIC SHREDDING OPERATION
Eliminates paper jams and powers through tough jobs.
JAM PROOF SYSTEM OPERATION*
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If
illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1 2 3
Up to RED: Too many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
ADVANCED PRODUCT FEATURES
14
Do nothing and
shredder will go
automatically to sleep
mode after 2 minutes
of inactivity
Press ( ) ON to activate
1
Feed paper/card straight
into paper entry and
release
Plug in and put disconnect
power switch in ON
(I) position
When finished
shredding set to
OFF (
)
or or
AUTO
5
AUTO
2
Hold CD/card at edge,
and feed into center of
entry and release
2
2
5
Mi
1
4
3
2
2
5
Mi
1
4
4
2
2
5
Mi
1
4
6
Jam Proof System
Eliminates paper jams and powers
through tough jobs
Patented SafeSense
®
Technology
Stops shredding immediately when hands
touch the paper entry
Energy Savings System
Optimal energy efficiency 100% of
the time – in use and out of use.
SAFESENSE
®
TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
ENERGY SAVINGS SYSTEM
• Saves energy in four ways: energy-efficient electronics, jam prevention,
standby mode and sleep mode.
• Sleep Mode shuts down shredder after 2 minutes of inactivity.
Optimal energy efficiency 100% of
the time – in use and out of use.
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
SET-UP AND TESTING
Turn the shredder ON
( ) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 3 seconds
shredder will shut off
2
2
5
Mi
1
4
2
2
5
Mi
1
4
3 4
AUTO
1
2
2
5
Mi
1
4
2
WHEN IN SLEEP MODE
In sleep mode
To get out of sleep mode
touch control panel
insert paper
or
2
2
5
Mi
1
4
2
2
5
Mi
1
4
1
3
AUTO
2
225Mi_406936_RevB_NA_3L_112612.indd 14-3225Mi_406936_RevB_NA_3L_112612.indd 14-3 11/27/12 4:47 PM11/27/12 4:47 PM