3
BASIC PRODUCT MAINTENANCE
LIMITED PRODUCT WARRANTY
Set to Auto-On (I)
1
1 2
3 4
65
3
Set to Off (O)
and plug in
Feed into center of
entry and release
Set to Off (O)
Feed into paper
entry and release
Continuous operation:
Upto 5 minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
5 minutes will trigger a
15-minute cool down period.
Check paper
amount
BASIC SHREDDING OPERATION
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
Allcross-cutshreddersrequireoilforpeak
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
stop running. To avoid these problems, we
recommend you oil your shredder each time
you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Set to Reverse (R)
for 2-3 seconds
* Apply oil
across entry
Set to Off (O)
2
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of
defects in material and workmanship and provides service and support for 1 year from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 3 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
remedywillberepairorreplacement,atFellowes’optionandexpense,ofthedefectivepart.This
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
soldbyanauthorizedreseller.ANYIMPLIEDWARRANTY,INCLUDINGTHATOFMERCHANTABILITY
ORFITNESSFORAPARTICULARPURPOSE,ISHEREBYLIMITEDINDURATIONTOTHEAPPROPRIATE
WARRANTYPERIODSETFORTHABOVE.InnoeventshallFellowesbeliableforanyconsequential
or incidental damages attributable to this product. This warranty gives you specific legal rights.
The duration, terms, and conditions of this warranty are valid worldwide, except where different
limitations,restrictions,orconditionsmayberequiredbylocallaw.Formoredetailsortoobtain
service under this warranty, please contact us or your dealer.
PAPER/CARD
Safety Lock prevents accidental operation. To set, wait for shredding to stop, push black button down and slide towards front of shredder.
To unlock push black button down and slide toward back of shredder. For greater safety, always unplug shredder after use.
or
Gently pull uncut
paper from paper
entry. Plug in.
Press and hold
Reverse (R)
PAPER JAM
Alternate slowly back and forth
Press and hold
Reverse (R)
Set to Off (O)
and unplug
421 63 5
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature
and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery
time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.