To Next PageTo Next Page
Need help?Do you have a question about the Fellowes SATURN 3i 125 and is the answer not in the manual?
Identifies the On/Off switch, feed sensor, selection buttons, release lever, entry slot, and exit.
Instructions for ensuring stable placement, clear space, and proper power connection for the machine.
Step-by-step guide on powering on, selecting settings, inserting documents, and handling laminated items.
Essential guidelines for safe operation, including placement, water avoidance, and electrical safety.
Lists actions to avoid, such as leaving cords near heat, using damaged cords, or attempting repairs.
Identifies the On/Off switch, feed sensor, selection buttons, release lever, entry slot, and exit.
Instructions for ensuring stable placement, clear space, and proper power connection for the machine.
Step-by-step guide on powering on, selecting settings, inserting documents, and handling laminated items.
Essential guidelines for safe operation, including placement, water avoidance, and electrical safety.
Lists actions to avoid, such as leaving cords near heat, using damaged cords, or attempting repairs.
General| Maximum Laminating Width | 12.5 inches |
|---|---|
| Laminating Speed | 12 inches per minute |
| Maximum Pouch Thickness | 5 mil |
| Auto Shut-Off | Yes |
| Jam Release Lever | Yes |
| Number of Rollers | 2 |
| Weight | 5.3 lbs |
| Power Supply | 120V, 60Hz |
| Warm-up Time | 60 seconds |
| Pouch Thickness Range | 3-5 mil |
