Felt AR - Page 14

To install the Shimano Di2 Battery Clip and Compression Spring into the InternaLoc Seatpost Wedge, place one half of
the InternaLoc Seatpost Wedge on a flat surface. Place one of the round mounting pins at the top of the Shimano Di2
Battery Clip into the small indent toward the bottom edge of the first half of the black InternaLoc Seatpost Wedge. Place
the Compression Spring into the larger indent at the center of the InternaLoc Seatpost Wedge. Place the other half of the
InternaLoc Seatpost Wedge on top of the bottom half seating spring and Shimano Di2 Battery Clip mounting pin in the
appropriate indentations.
-12-