Squeeze the assembly together with the front being
the lowest point (angled downward toward the
front of the bike) and insert it into the bottom of the
seatpost.
Note: Apply a thin coat of carbon friction paste
on the surface of aluminum InternaLoc Seatpost
Wedge that will contact the carbon fiber surface
of seatpost to prevent slipping or noise.
Slide the assembly up into the seatpost until the
guides on each side of the internal seatpost wedge
snap into the slots on each side of the seatpost.
Be sure to keep the assembly at the bottom of the
seatpost for now.
click!
To Next Page
Loading...
