Need help?Do you have a question about the Fender '63 Vibroverb and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power Output | 40 Watts |
| Speaker | 1x15" Jensen C15N |
| Power Tubes | 2 x 6L6GC |
| Effects | Reverb, Vibrato |
| Configuration | Combo |
| Manufacturer | Fender |
| Year Introduced | 1963 |
| Rectifier Tube | 1 x GZ34 |
| Channels | 2 |
| Inputs | 2 |
Details the limited production life and collector status of the original '63 Vibroverb amplifier.
Explains the re-issue is based on original cosmetics, sound, and circuit, with safety modifications.
Highlights the Vibroverb's unique tapped treble control, warm reverb, and vibrato features.
Notes the re-issue incorporates original brown Tolex, Ecru grill cloth, and tilt-back legs.
Caution to reduce risk of fire or shock; do not expose amplifier to rain or moisture.
Plug-in connection for instruments; Input 1 offers higher gain. Affected by vibrato only.
Adjusts the overall loudness of the NORMAL CHANNEL.
Adjusts the amount of high frequency boost or cut in the NORMAL CHANNEL.
Adjusts the amount of low frequency boost or cut in the NORMAL CHANNEL.
Plug-in connection for instruments; provides extra treble boost. Affected by reverb and vibrato.
Adjusts the overall loudness of the BRIGHT CHANNEL.
Adjusts the amount of high frequency boost or cut in the BRIGHT CHANNEL.
Adjusts the amount of low frequency boost or cut in the BRIGHT CHANNEL.
Adjusts the amount of reverberated signal mixed with the original signal.
Adjusts the speed of the VIBRATO feature.
Adjusts the intensity of the VIBRATO feature.
Indicates when the '63 VIBROVERB is receiving power.
Protects the amplifier and operator from electrical faults.
Not functional; preserved for original appearance on certain models.
Turns the AC power ON and OFF.
Turns amplifier on/off; maintains tube filament power for warm-up.
Primary plug-in connection for speakers.
Connects to an external speaker, wired in parallel with the main jack.
Connects to the footswitch for controlling vibrato and reverb.
Use grounding type cord connected to a grounded receptacle; do not alter plug.
Lists the Fender Special Design tubes required for optimum performance.
Instructions for cleaning the Tolex covering with a mild soapy solution.
Step-by-step guide to diagnose and resolve common amplifier setup issues.
Lists part numbers for different voltage versions and physical dimensions.
Specifies the amplifier's weight and minimum RMS power output.
Details input impedance values and key amplifier features like vibrato and reverb.
Lists power consumption (watts) for various voltage and frequency configurations.
Describes the specifications of the two 10" Oxford speakers used.
Characterizes the amplifier's sound quality as 'Legendary'.
To Next Page