EasyManua.ls Logo

Fender Acoustasonic 40 - Features; Specifications

Fender Acoustasonic 40
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
ENGLISH
Two 6.5” Special Design full-range speakers with whizzer cones for enhanced high-frequency response
Two channels, each with combination XLR and ¼” inputs for choice of instrument or microphone
Three-band equalizer controls for each channel
Digital hall reverb with level control for each channel
Headphone output
Auxiliary input for use with external audio devices
XLR line output for use with PA system and recording equipment
Vintage-style brown textured vinyl covering
Features
INPUT VOLUME BASS MIDDLE TREBLE REVERB
PHONES
AUX
CHANNEL 2
EQUALIZER
POWERINPUT VOLUME BASS MIDDLE TREBLE REVERB
CHANNEL 1
EQUALIZER
Specifications
TYPE PR 4474
POWER Requirements: 130 watts Output: 40 watts into 4Ω @ ≤2% THD, 1kHz
INPUT IMPEDANCE 4.7MΩ (instrument inputs 1 and 2) 1.8kΩ minimum, 3.6kΩ balanced (microphone inputs 1 and 2)
LINE OUT Balanced +4dBu
SPEAKERS Two 6.5” Special Design with whizzer cones (8Ω)
FUSE T1.25AL 250V (100V) T1AL 250V (120V) T500mAL 250V (230V-240V)
DIMENSIONS Width: 15” (38.1 cm) Height: 11.625” (29.5 cm) Depth: 7.125” (18.1 cm)
WEIGHT 16.2 lbs. (7.35 kg)
Product specifications subject to change without notice.
120V 60Hz
INPUT POWER
130W
WARNING:
MAINTAIN 6" CLEARANCE
FOR VENTILATION.
BALANCED
LINE OUT
IS A REGISTERED TRADEMARK OF
FENDER MUSICAL INSTRUMENTS CORP.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA U.S.A.

Related product manuals