Fender BXR 25 - BXR 25 Specifications; Power Amplifier and Preamp Specifications; Physical and Speaker Specifications; BXR 25 Block Diagram

PART NUMBER 022-4403
POWER AMPLIFIER SECTION
Power output: 25 Watts
Rated load impedance: 8 Ohms
Distortion at rated power: 5%
Power bandwidth: 20 Hz to 20kHz
Input sensitivity: .90 VOLT R.M.S.
Input impedance: >10k Ohms
PREAMP SECTION
Input impedance: Input 1 > 220k Ohms
Input 2 > 11Ok Ohms
Sensitivity: Volume at maximum, all Input I > 10mV
tone controls at “0” Input 2 > 20mV
detent, power amp
at 25 Watts, 8 Ohms
Equalization range: HIGH +/- 15 dB at 8kHz
MID +/- 15 dB at 800 Hz
LOW +/- 15 dB at 40 Hz
PHYSICAL SPECIFICATIONS
Width: 14-3/4 inches (37.5 cm)
Height: 18 inches (45.7 cm)
Depth: 10 inches (25.4 cm)
Weight: 32 lbs. (14.5 kg)
Speaker: 1-10” Fender Special Design (P/N 038657)
Sound: HUGE
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
BREA, CA 92621
BXR 25 SPECIFICATIONS
BXR 25 BLOCK DIAGRAM
+
WARNING: NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.