To Next PageTo Next Page
Need help?Do you have a question about the Fender FIGHTER 10 and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Speaker Type | Powered |
| Woofer Size | 10 inches |
| Power | 100 Watts |
| Channels | 2 |
| Outputs | XLR line output |
| Speaker Size | 10 inches |
Treble frequency boost/cut; one for each of the three channels. Control is "flat" in center position (no effect on channel sound).
Bass frequency boost/cut; one for each of the three channels. Control is "flat" in center position (no effect on channel sound).
Adjusts volume of each channel relative to volume of other channels.
For connection of line-level input sources to channels one and two (left and center channels).
Selects input sensitivity for channels one and two (left and center channels).
Input for connection of microphones and line-level input sources to channels one and two.
XLR output for connection to additional Fighter speakers or external subwoofer.
Provides 3.5 mm connection for auxiliary devices such as MP3 players, computers.
Activates Bluetooth module for pairing with external devices.
Adjusts overall volume level of all three channels.
Selects full-range frequency response or activates internal high-pass crossover.
Illuminated when unit is on.
Connect to a grounded outlet in accordance with voltage and frequency specifications.
Turns unit on and off.
Caution to reduce fire risk by replacing fuse with the same type and rating.
