Frontman 10G Guitar Amplifier
A. INPUT – Plug your guitar in here.
B. GAIN – Controls the amount of signal distortion
when Overdrive {C} is selected.
C. O.D. – Activates the Overdrive circuit.
D. VOLUME – Controls the loudness of the
amplifier.
E. TREBLE / BASS – Use to adjust high and low
frequency tone.
F. AUX IN – 3.5mm input jack for your CD player,
drum machine, etc. Adjust the loudness of this
input using the volume control on the device.
G. HEADPHONES – Plug your headphones
in here; the Frontman 10G speaker turns off
automatically.
H. POWER – Switches the amplifier ON–OFF as
indicated by the power-on light.
I. POWER CORD – Plug the unit in to a grounded
outlet in accordance
with the voltage and
frequency ratings listed
on the rear panel of
your amplifier.
TYPE: PR 760
PART NUMBERS: 2311000000 (120V, 60Hz)
2311000900 (120V, 60Hz) DS
2311001900 (110V, 60Hz) TW DS
2311003900 (240V, 50Hz) AUS DS
2311004900 (230V, 50Hz) UK DS
2311005900 (220V, 50Hz) ARG DS
2311006900 (230V, 50Hz) EUR DS
2311007900 (100V, 50Hz) JPN DS
2311009900 (220V, 60Hz) ROK DS
POWER REQUIREMENT: 28W
POWER OUTPUT: 10W RMS into 4Ω
DIMENSIONS: HEIGHT: 11.5 in (29.2 cm),
WIDTH: 10.5 in (26.7 cm),
DEPTH: 5.75 in (14.6 cm)
WEIGHT:
8.5 lb (3.9 kg)
Product specifications are subject to change without notice.
Your new Frontman 10G guitar amplifier delivers
world–class Fender® tone and world–standard
Fender® quality.
Thank you for choosing Fender®
—Tone, Tradition and Innovation—since 1946
To Next Page
Loading...
