2 . 0
8
f e n d e r . c o m
Click on the "BAND" button {A} to select a Band track and adjust Band settings. Although you cannot store Band tracks on your Mustang™
amplifier like you can on the G-DEC® 3, you can play songs on your computer through Fender® FUSE™ and save the associated track as
part of a Mustang preset.
B. MP3 / WAVE — Select the MP3/Wave radio button if you want
to select an MP3/Wave Band track file for the currently active
preset on the G-DEC 3.
C. TRACK LIST — Click on this drop down list to select an MP3/
Wave Band track on the G-DEC 3 hard drive (HD) or SD card on
the G-DEC 3.
D. REPEAT — Click on this box for endless loop playback.
E. AUDIO MIX — Choose an audio mix for the Band track selected
in the Track List {C}. Select STEREO for normal operation. Select
LEFT/RIGHT MIX if you want to adjust the balance of the Band
track to focus on the audio content of one channel. Select
CENTER CANCEL if you want to eliminate the audio in the
"center" of the mix in a stereo file. This is often effective in
removing the lead guitar and vocals from a song.
F. BALANCE — Adjusts the left/right (1/10) balance for the Band
track selected in the Track List {C} when LEFT/RIGHT MIX is
chosen for the Audio Mix {E}.
G. SPEED — Adjusts the playback speed of the Band track.
H. PITCH — Adjusts the pitch of the Band track.
I. PREVIEW / STOP — Click to listen to the Band track selected in
the Track List {C}.
J. OK — Click OK to save your Band track selection and settings for
the currently active preset on the G-DEC 3.
K. MIDI — Select the MIDI radio button if you want to select a MIDI
Band track file for the currently active preset on the G-DEC 3.
L. TRACK LIST — Click on this drop down list to select a MIDI Band
track on the G-DEC 3 hard drive (HD) or SD card on the G-DEC3.
M. REPEAT — Click on this box for endless loop playback.
N. TEMPO — Adjusts the tempo of the MIDI Band track.
O. TRANSPOSE — Use to transpose the key of the MIDI Band track.
P. DRUM SOLO — Select this check box if you want the MIDI Band
track to play only the drums channel (ch 10) of the MIDI file.
Q. COUNT IN — Select how many beats you want the MIDI file
selected in the Track List {L} to count in before the actual song
starts. Four is a typical number for most songs written in 4/4
time signature.
R. PREVIEW / STOP — Click to listen to the Band track selected in
the Track List {L}.
S. OK — Click OK to save your Band track selection and settings for
the currently active preset on the G-DEC 3.
T. MP3 / WAVE — Select the MP3/Wave radio button if you want
to select an MP3/Wave Band track file for the currently active
preset on the Mustang.
U. TRACK LIST — Click on this drop down list to select a Band
track on your computer for the currently active preset on your
Mustang. When you start the band track the audio will play
through your computer speakers, so you will need to adjust the
playback volume through your computer and from the speaker
volume control.
V. REPEAT — Click on this box for endless loop playback.
W. PREVIEW / STOP — Click to listen to the Band track selected in
the Track List {U}.
X. OK — Click OK to save your Band track selection and settings for
the currently active preset on the Mustang.
Band Track Screens
Mustangs Only
G-DEC 3 Only
To Next Page
Loading...
General