Need help?Do you have a question about the Fender PASSPORT VENUE Series 2 and is the answer not in the manual?
General| Type | Portable PA System |
|---|---|
| Effects | Reverb, Delay |
| Speaker Configuration | 2-Way |
| Included Accessories | Power Cable, User Manual |
| EQ | 3-Band EQ |
| Amplifier Power | 600 Watts |
| Speakers | 2 x 10" |
| Inputs | 4 x XLR-1/4" combo, 1 x 3.5mm stereo |
Instructions for opening latches and detaching speaker cabinets from the powered mixer section.
Guidance on optimal speaker placement and mixer positioning for best stereo separation.
Details on storing power and speaker cables and connecting them to the system.
How to connect microphones, instruments, and other audio sources to the channels.
Procedure for setting initial master volume, channel volumes, and reverb levels.
Steps for powering on the Passport system and checking the power indicator.
Guidance on adjusting master volume and individual channel levels for optimal sound.
Instructions for setting tone (treble/bass) and reverb for desired sound characteristics.
Controls for overall loudness and indicators for output signal levels.
Controls for adjusting tonal character, selecting reverb type, and setting reverb time.
Individual channel adjustments for volume, tone, reverb, and input sensitivity.
Various input jacks for microphones, instruments, line-level sources, and mobile devices.
Connections for headphones, mono output, and subwoofer output.
LED indicators for system power status and protection mode activation.
Adjusting voltage settings and turning the unit on/off.
Location for connecting the power cord and accessing the fuse for replacement.
Ports for connecting the external speaker cabinets using dedicated cables.
To Next Page
