Need help?Do you have a question about the Fender Passport 150 Pro and is the answer not in the manual?
Adhere to instructions, heed warnings, and keep documentation for safety.
Avoid water, heat, and obstructions; protect power cords from damage.
Use specified accessories, unplug during storms, and use qualified service personnel.
FCC compliance statement and safety guidelines for product batteries.
Release latches and detach the two speaker cabinets from the powered mixer unit.
Elevate speakers on stands or tables and position them apart for stereo separation.
Open the rear storage compartment to retrieve the power cord and speaker cables.
Attach speaker cables to the mixer outputs and then to the respective speakers.
Adjust overall system loudness (Volume) and tone character (Tone) for the Passport.
Manage signal presence, level, tone, reverb, and input sensitivity (PAD) for each channel.
Connect recording equipment; master volume does not affect this output.
LEDs show power status and indicate if the unit has shut down for protection.
Features voltage selector, power switch, socket, fuse holder, and speaker outputs.
Details model type, part numbers, power needs, physical dimensions, and weight.
Adhere to instructions, heed warnings, and keep documentation for safety.
Avoid water, heat, and obstructions; protect power cords from damage.
Use specified accessories, unplug during storms, and use qualified service personnel.
FCC compliance statement and safety guidelines for product batteries.
Release latches and detach the two speaker cabinets from the powered mixer unit.
Elevate speakers on stands or tables and position them apart for stereo separation.
Open the rear storage compartment to retrieve the power cord and speaker cables.
Attach speaker cables to the mixer outputs and then to the respective speakers.
Adjust overall system loudness (Volume) and tone character (Tone) for the Passport.
Manage signal presence, level, tone, reverb, and input sensitivity (PAD) for each channel.
Connect recording equipment; master volume does not affect this output.
LEDs show power status and indicate if the unit has shut down for protection.
Features voltage selector, power switch, socket, fuse holder, and speaker outputs.
Details model type, part numbers, power needs, physical dimensions, and weight.
General| Power Output | 150 watts |
|---|---|
| Channels | 2 |
| Speaker Type | Full-range |
| Speakers | 2 |
| Type | Portable PA System |
| Inputs | XLR, 1/4", RCA |
To Next Page