Need help?Do you have a question about the Fender Passport Event Series 2 and is the answer not in the manual?
General| Type | Portable PA System |
|---|---|
| Effects | Reverb |
| Built-in Mixer | Yes |
| Wireless Microphone Compatibility | Yes |
| Inputs | 4 x XLR/1/4" combo |
| Enclosure Material | Molded Plastic |
| Dimensions | 14.5" |
| MP3 Player Input | Yes |
Flip open latches, position speakers for stereo separation, and elevate for optimal sound.
Store cables in the rear compartment and connect speaker cables and power cord correctly.
Connect microphones, instruments, and mobile devices to appropriate channels for audio input.
Set initial volume, reverb to minimum, and power up external equipment first.
Adjust channel volume/tone and master volume, monitoring signal LEDs for optimal sound.
Adjust treble, bass, and reverb controls on each channel for desired sound quality.
Master Volume, Signal Level Meters, Clip LED, Power LED, and Protect LED for system status.
Individual channel volume, treble, bass, reverb, and mic/line switch for sound shaping.
Description of all input (mono, stereo, line, instrument, Bluetooth) and output connectors.
Instructions for pairing external devices via Bluetooth for wireless audio playback.
Voltage selector switch for global use and the main power on/off switch.
Location for power cord connection and fuse holder for electrical safety.
Connect Passport speaker cables to the left and right speaker output terminals.
Key technical details of the Passport Event Series 2, including power, speakers, and dimensions.
To Next Page
