Fender Passport Event Series 2 - REAR PANEL FEATURES; VOLTAGE SELECTOR AND POWER SWITCH; POWER CORD SOCKET AND FUSE; SPEAKER OUTPUT TERMINALS

ENGLISH
4
REAR PANEL
S. VOLTAGE SELECTOR: Change the setting of this 100V/120V–
220V/240V switch only when using Passport in a country that
requires a dierent voltage setting.
T. POWER: Turns Passport on and o.
U. POWER CORD SOCKET/FUSE : Connect power cord (included)
to this socket; plug other end into a grounded AC outlet in
accordance with correct VOLTAGE SELECTOR (S) setting. To
check/replace fuse, unplug power cord and pry fuse holder
from POWER CORD SOCKET; replace fuse only with another of
the same type and rating.
V. SPEAKER OUTPUTS: Connect Passport speaker cables
(included) here.
SPECIFICATIONS
TYPE PR 845
POWER REQUIREMENT 450W
POWER OUTPUT 375W
FUSE T6.3A H, 250V
AMPLIFIER TYPE Class D
SPEAKERS Two 8” woofers, two 1.2” HF drivers
DIMENSIONS AND WEIGHT Width: 29” (73.66 cm) Height: 23” (58.42 cm) Depth: 11” (27.94 cm) Weight: 44 lbs. (19.96 kg)
Product specifications subject to change without notice.