PRINCETON CHORUS DSP - SPECIFICATIONS
9
TYPE: PR 424
PART NUMBER: 022-5700-020 (120V)
022-5730-020 (240V) Aust
022-5740-020 (230V) UK
022-5760-020 (230V) Eur
022-5770-020 (100V)
POWER REQUIREMENTS: 100V AC, 50/60 Hz: 180W
120V AC, 60 Hz: 180W
230V AC, 50 Hz: 180W
240V AC, 50 Hz: 180W
POWER AMP POWER OUTPUT: 25W per channel, (50W Total) @ 5% THD
RATED LOAD IMPEDANCE: 8Ω per channel
SENSITIVITY: 1.4V RMS
PREAMP INPUT IMPEDANCE: INPUT 1: >1MΩ / INPUT 2: >130kΩ
NOMINAL LEVEL: INPUT 1: 100mV / INPUT 2: 200mV
MONO EFFECTS LOOP: NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ (Balanced)
RETURN INPUT IMPEDANCE: 22kΩ (Balanced)
STEREO EFFECTS LOOP: NOMINAL LEVEL: -10dBv
SEND OUTPUT IMPEDANCE: 1kΩ
RETURN INPUT IMPEDANCE: 18kΩ
(Specifications for each channel:
Left on Tip, Right on Ring)
_____________________________________________________________________________
SPEAKER COMPLEMENT: TWO FENDER SPECIAL DESIGN
10”, 8Ω SPEAKERS (P/N 0029753000)
DIMENSIONS: HEIGHT: 17 1/2 in 44 cm
WIDTH: 22 3/8 in 57 cm
DEPTH: 10 3/16 in 26 cm
WEIGHT: 40 lb 18 kg
Fender®, Tone-Master®, and Princeton Chorus® are
registered trademarks of FMIC
Product specifications are subject to change without notice
To Next Page
Loading...
