SUPER CHAMP X2 COMBO/HEAD™
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
**FUSE QA AXIAL LEAD 1A 125V
**FUSE QA AXIAL LEAD 7A 125V
HDR .1 CTR 7x2 CKT SQ PIN
JACK STEREO R/A W/MTL BUSH
CAP MPF RDL .022uF 400V 10%
CAP MPF RDL .1uF 630V 10%
CONTROL SNAPIN 50k B TAPER
CONTROL PCB MNT LIN 30% 25K
R49 R58 R60-61 R66 R68-70 R77-78 R92
R100
R18-19 R28 R35-36 R46 R48 R72-76