FENDT BALER Series User Manual

SAFETY
A-30 700735021 E Rev.
FIG. 72: Balers after serial number **********CHB0X001
and Up have a bale density valve assembly with a density
bleed valve (6)
The decal shows how to operate the density bleed valve.
Pull down and twist until the valve locks to release
pressure (A).
Twist the valve stem until the valve goes back up into the
bale density valve block to return to automatic operation
(B).
FIG. 73: Stuffer clutch adjustment (7)
The decal shows the springs to adjust.
Go to the Adjustment section in this Operator Manual for
more information.
FIG. 74: Hydraulic reservoir fill location (8)
FIG. 72
700735715
6
A
B
FIG. 73
700728710
7
FIG. 74
501104D1
8

FENDT BALER Series Specifications

General

Brand	FENDT
Model	BALER Series
Category	Farm Equipment
Language	English