116
13. Technical data
Replacing the lamps in the rear lights
(Saphir, Bianco, Opal, Tendenza, Tiany)
• Loosen the two screws
j
underneath the chrome trim to the
left and right of the licence plate.
• The chrome trim
k
is also fastened with plastic clips. Pull on
them carefully to clip out the chrome trim.
• Loosen the mounting bolts
l
on the rear light and remove the
light from the nest.
• After changing the lamp, carry out this procedure in reverse
order to reinstall the rear light.
1
2
3
Your Fendt caravan dealer will be pleased to provide you with
competent advice should you require this.
In the “Diamant” models, this is an LED-only light. It is
not possible to replace individual bulbs.
Replacing the lamps in the rear lights
(Diamant)
To Next Page
Loading...