Feniex 4200 MINI - Wig-Wag Functions; Button Legend Sheet

Feniex Industries, Inc.
1.800.615.8350 / feniex.com
5
ALT. WIG-WAG
You can program outputs 1 & 2 to
operate as an alternating wig-wag
asher. To toggle this mode:
1. While the unit is powered, but
turned o, press and hold both
button #1 and button #2.
2. While holding the buttons from
step 1, press and hold the power
button until a beep is heard.
3. The mode has been toggled. To
change it again, repeat steps 1 & 2.
WIG-WAG FUNCTIONS
When the wig-wag function is
active, button #1 activates and
deactivates the mode while
button #2 changes the selected
ash patterns.
Wig-wag mode will override the
momentary functionality while it
is active in the programming.
BUTTON LEGEND SHEET