EasyManua.ls Logo

Fenix HM62-T - Product Features

Fenix HM62-T
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
Do place this headlamp out of the reach of children!
Do NOT shine the headlamp directly into the eyes of anyone!
Do NOT place the headlamp near flammable objects, high temperatures can cause objects to overheat and
become flammable/ignite!
Do NOT use the headlamp in inappropriate ways such as holding the unit in your mouth, doing so could cause
serious personal injury or death if the headlamp or internal battery fails!
This headlamp will accumulate a significant amount of heat while operating, resulting in a high temperature of
the headlamp shell. Pay close attention to avoid burns.
Turn off and lock the lamp or take out the battery to prevent accidental activation during storage or
transportation.
The LEDs of this headlamp are not replaceable; so the whole headlamp will need to be replaced when one of
the LEDs reaches the end of its lifespan.
Product Features
1200 lumens maximum output and 150 meters maximum beam distance.
Fitted with one Luminus SST40 white light LED and two 2835 red light LEDs; with a life span of 50,000 hours
each.
White and red light sources assist various lighting needs in different outdoor scenarios.
Quality magnesium alloy material manufactured lamp body, lightweight and durable.
Included is one rechargeable 3400mAh battery that has a built-in USB Type-C charging port.
Simple operation with a large side switch.
Single-handed operation with the 26 mm width two-way adjustable headband.
An emergency whistle is attached to the headband to ensure users' safety.
Electronic lockout avoids accidental activation.
IP68-rated protection and 2 meters impact resistance.
Size: 3.22'' × 1.19'' × 1.02''/81.8 × 30.2 × 26 mm.
Weight: 4.41 oz/125 g (including battery).
Operating Instructions
On/off
Press and hold the switch for 0.5 seconds or double click the switch to turn on the lamp.
Press and hold the switch for 0.5 seconds to turn off the lamp.
Mode switching
With the lamp switched off, press and hold the switch for 0.5 seconds to turn on the lamp and enter the white
light mode.

Related product manuals