Need help?Do you have a question about the Fenner QD:E 572B20P4 and is the answer not in the manual?
Essential safety precautions for installation and operation to prevent injury or death.
Information on EMC standards and compliance for the drive.
Instructions and guidelines for proper grounding of the drive for safety.
Details of connections for control terminals and their functions.
How to navigate and use the drive's keypad for operation and monitoring.
Procedure to reset drive parameters to factory defaults.
How to control the drive using external terminals.
How to control the drive using the keypad.
Detailed description of standard configurable parameters and their ranges.
Defines the function of digital inputs based on control mode.
Configures the voltage or current format of the analog input signal.
Configuration of analog and digital inputs for terminal control mode.
Input configurations for keypad control modes.
Analog and digital input settings for User PI control modes.
Lists and explains common fault messages and their causes.
Information on AC supply voltage requirements for the drive.
Guidance on selecting appropriate fuses, MCBs, and cable sizes.
Basic wiring instructions for control terminals and keypad operation.
Instructions for connecting the motor, including star/delta configurations.
General| Frequency | 50/60 Hz |
|---|---|
| Power Rating | 20 HP |
| Efficiency | 98% |
| Protection | Overcurrent, Overvoltage, Undervoltage, Over Temperature, Short Circuit, Ground Fault |
| Motor HP | 20 HP |
| Output Current | 34 A |
| IP Rating | IP20 |
| Operating Temperature | -10°C to +50°C |
To Next Page
