Need help?Do you have a question about the Fenner QD:E Series and is the answer not in the manual?
General| Cooling | Fan Cooled |
|---|---|
| Enclosure Rating | IP20 |
| Input Voltage | 200-240V AC |
| Power Rating | 0.75-2.2kW |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20-60°C |
| Humidity | 5-95% non-condensing |
Crucial safety warnings for installation and operation to prevent injury or death.
Guidelines for storing, mounting, and general installation environment of the drive.
Detailed instructions and guidelines for proper grounding of the drive and its components.
Essential precautions for connecting power and motor cables to the drive.
Details the function and signal for each control terminal connection.
Step-by-step guide on how to modify parameter values using the keypad.
Illustrates various wiring examples for terminal mode control with digital and analog inputs.
Lists and explains common fault messages displayed by the drive.
Guide to connecting AC supply voltage and selecting appropriate fuses or MCBs.
To Next Page
