Ferm AGM1043 - SAFETY WARNINGS; ADDITIONAL SAFETY WARNINGS FOR ANGLE GRINDERS

5
EN
ANGLE GRINDER
AGM1043
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
SAFETY WARNINGS
1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, re and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
4
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
6
Risk of ying objects. Keep bystanders
away from the work area.
5
Wear safety goggles. Wear hearing
protection.
I
Wear safety gloves.
J
Do not press the spindle lock button
while the motor is running.
K
Risk of re.
8
Do not dispose of the product in
unsuitable containers.
9
The product is in accordance with the
applicable safety standards in the
European directives.
ADDITIONAL SAFETY WARNINGS FOR
ANGLE GRINDERS
● Themachinehasbeendesignedforuseasa
grinder or cut-off machine. The machine is not
suitable for operations such as sanding, wire
brushing, polishing, etc. Risk of personal injury.
● Donotuseaccessorieswhicharenot
specicallydesignedandrecommendedby
the manufacturer. Risk of personal injury.
● Inspectthemachineandtheaccessories
beforeeachuse.Donotuseaccessories
which are bent, cracked, or otherwise
damaged.Ifthemachineoroneofthe
accessories is dropped, inspect the machine
ortheaccessoryfordamage.Ifnecessary,
replace the accessory.
● Letthemachinerunatnoloadinasafearea
aftermountingtheaccessories.Ifthemachine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
● Makesurethatthemaximumspeedforthe
grinding disc is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
● Onlyusegrindingdiscswiththecorrect
thickness and outside diameter. Refer to the
rating plate on the machine.
● Makesurethatspindlediameterofgrinding
discs, spacers, tension nuts, etc. correspond
to the diameter of the spindle on the machine.
● Makesurethatthegrindingdiscisproperly
mounted.Donotuseadaptersorotheraidsto
mount grinding discs with another spindle
diameter.
● Onlyusegrindingdiscsthatarerecommended
bythemanufacturer.Onlyuseguardsthatare
specicallydesignedforthegrindingdisc.
● Onlyusegrindingdiscsthataresuitablefor
the application. For example: do not grind with
the side of a cut-off disc.
● Donotusethemachinewithouttheguard.
Securely mount the guard for maximum safety.