Ferm AGM1043 - USE; Hints for optimum use; CLEANING AND MAINTENANCE; Disposal

8
EN
● Keepthespindlelockbutton(3)pressedand
rmlytightenthetensionnut(11)usingthe
spanner (12).

● Tightentheauxiliarygrip(7)intooneofthe
mountingholes(13).
USE

● Toswitchonthemachineincontinuousmode,
slide the on/off switch lock (2) to the right and
slide the on/off switch (1) in the direction of the
grindingdisc(g.D1).
● Toswitchoffthemachine,pressthelowerpart
oftheon/offswitch(1)(g.D2).
Hints for optimum use
● Clamptheworkpiece.Useaclampingdevice
for small workpieces.
● Drawalinetodenethedirectioninwhichto
guide the grinding disc.
● Holdthemachinewithbothhands.
● Switchonthemachine.
● Waituntilthemachinehasreachedfullspeed.
● Placethegrindingdiscontheworkpiece.
● Slowlymovethemachinealongthepre-drawn
line,rmlypressingthegrindingdiscagainst
the workpiece.
● Donotapplytoomuchpressureonthe
machine.Letthemachinedothework.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.

Ifthecarbonbrushesareworn,thecarbonbrush
indicator (8) will come on. The carbon brushes
must be replaced by the customer service
department of the manufacturer or a similarly
qualiedperson.
WARRANTY
Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.

Donotdisposeofpowertoolsintodomestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to
change.Specicationscanbechangedwithout
further notice.