Ferm CDM1062 User Manual

EN
DE
NL
FR
ES
PT
IT
SV
FI
NO
DA
Cordless drill
14.4V - 1.3 Ah
CDM1062
www.ferm.com
Original instructions 04
Übersetzung der Originalbetriebsanleitung 08
Vertaling van de oorspronkelijke gebruiksaanwijzing 13
Traduction de la notice originale 18
Traducción del manual original 23
Tradução do manual original 28
Traduzione delle istruzioni originali 33
Översättning av bruksanvisning i original 38
Alkuperäisten ohjeiden käännös 43
Oversatt fra orginal veiledning 47
Oversættelse af den originale brugsanvisning 52

Ferm CDM1062 Specifications

General

Chuck Size	13 mm
Voltage	230 V
Cable length	3 m
Drill capacity in wood	30 mm
Drill capacity in metal	13 mm
No Load Speed	0-3000 RPM
Impact Rate	0-48000 /min

Summary

Cordless Drill Introduction and Safety

Vibration Level Information

Details on measured vibration emission levels and their impact on user exposure.

Package Contents Overview

Lists all items included in the product packaging for initial setup.

Machine Information and Specifications

Provides detailed technical specifications and identification of the cordless drill's components.

General Safety Instructions

Covers explanation of symbols, charger/battery safety, electrical safety, and cable replacement.

Using the Cordless Drill

Mounting Accessories

Instructions for fitting and removing drill cutters and connecting/removing the battery.

Operation Controls

Guide on adjusting speed and torque, driving screws, drilling, and switching the device on/off.

Maintenance and Troubleshooting

Service and Maintenance Procedures

Details on cleaning, lubrication requirements, and handling of common faults.

Product Compliance and Parts

Declaration of Conformity

Formal statement of the product's compliance with relevant EU directives and standards.

Spare Parts and Exploded View

Lists spare parts and provides an exploded view diagram of the cordless drill components.