To Next PageTo Next Page
Need help?Do you have a question about the Ferm FP-82 and is the answer not in the manual?
General| Planing width | 82 mm |
|---|---|
| Planing depth | 3 mm |
| Max. planing width | 82 mm |
| Voltage | 230 V |
| No load speed | 16000 rpm |
Use safety glasses, dust masks, safety footwear, gloves, and ear protection. Dress properly and stay alert.
Follow safety guidelines for starting, work area, electric shock, children, tool usage, cable handling, and maintenance.
Follow wire color coding (Blue-Neutral, Brown-Live) and secure mains cable firmly in the plug cord grip.
Check voltage, plug, lead condition. Use only on dry surfaces. Be cautious with old painted surfaces.
Attach the bag to the dust exhaust hole. Empty frequently. It can be removed for dust extractor attachment.
Loosen the guide lock knob, slide the guide assembly arm, and tighten. Secure the knob when not in use.
Ensure switch is OFF, plug into mains, route cable, then switch ON. Release button (E) after starting.
Turn the height control knob (A) to set the depth. The pointer indicates depth in mm on scale (B).
Place planer on workpiece, switch on, let to full speed, then move forward gently. Keep planer flat.
Secure workpiece, let machine reach full speed, use gentle pressure, check for nails, keep moving straight.
Wear protective equipment. Do not use water or flammable liquids. Clean with a soft brush.
Switch off and unplug. Remove cover, pull old belt off pulleys, fit new belt, and replace cover.
Switch off and unplug. Use gloves. Undo nuts, remove old blade, install new blade, tighten screws, check clearance.
Troubleshoot issues like damaged plug/cable, defective switch, overheating, no shavings removal, or no start.
