Ferm PSM1024 - Technical Data; Description (Fig. A); Cleaning and Maintenance

5
EN
TECHNICAL DATA
PSM1030P
Mainsvoltage V~ 220-240
Mainsfrequency Hz 50
Powerinput W 520
No-loadspeed min
-1
 10,000
Sanding surface mm 114 x 234
Protectionclass  IP20
Weight kg 1.91
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardisedtestgiveninEN60745;itmaybeused
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- usingthetoolfordifferentapplications,orwith
different or poorly maintainted accessories,
maysignicantlyincreasetheexposurelevel
- thetimeswhenthetoolisswitchedofforwhen
it is running but not actually doing the job, may
signicantlyreducetheexposurelevel
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
yourhandswarm,andorganizingyourwork
patterns
DESCRIPTION (FIG. A)
Yournishingsanderhasbeendesignedfor
sanding wood, metal, plastics and painted
surfaces.
 1. On/offswitch
2. Sanding pad
3. Sanding paper clamp
4. Grip
ASSEMBLY
4
Before assembly, always switch off the
machine and remove the mains plug
from the mains.
Mounting and removing the sanding paper
(sanding paper clamps) (g. C)
Mounting
● Openthesandingpaperclamps(4).
● Mountsandingpaper(7)withtherequired
grainsizeontothesandingpad(3).
● Foldthesandingpaper(7)atbothends
aroundtheedgesofthesandingpad(3).
● Closethesandingpaperclamps(4)oneby
one.Makesurethattheendsofthesanding
paper(7)areclamped.
Removing
● Openthesandingpaperclamps(4).
● Removethesandingpaper(7)fromthe
sandingpad(3).
USE
Switching on and off (g. A)
● Toswitchonthemachine,presstheon/off
switch(1).
● Toswitchoffthemachine,releasetheon/off
switch(1).
Hints for optimum use
● Clamptheworkpiece.
● Firmlyholdthemachinebythegrip.
● Switchonthemachine.
● Placethesandingpadwithsandingpaperon
the workpiece.
● Slowlymovethemachineovertheworkpiece,
rmlypressingthesandingpadagainstthe
workpiece.
● Donotapplytoomuchpressureonthe
machine. Let the machine do the work.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.
● Regularlycleanthesandingpadtoavoid
inaccuracies during use.