EasyManua.ls Logo

Ferm psm1026 - Cleaning and Maintenance

Ferm psm1026
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Ferm
EN
Removing
● Openthesandingpaperclamps(4).
● Removethesandingpaper(7)fromthe
sandingpad(3).
● Closethesandingpaperclamps(4).
USE

● Toswitchonthemachine,presstheon/off
switch(1).
● Toswitchthemachinetocontinuousmode,
keeptheon/offswitch(1)pressedand
simultaneouslypressthelock-onbutton(2).
● Toswitchoffcontinuousmode,presstheon/off
switch(1)again.
● Toswitchoffthemachine,releasetheon/off
switch(1).

● Insertthedustextractionadapter(9)intothe
dustextractionconnection(7).
● Connectthehoseofavacuumcleanertothe
dustextractionadapter(9).
Hints for optimum use
● Clamptheworkpiece.
● Firmlyholdthemachinewithbothhands.
● Switchonthemachine.
● Placethesandingpadwithsandingpaperon
theworkpiece.
● Slowlymovethemachineovertheworkpiece,
rmlypressingthesandingpadagainstthe
workpiece.
● Donotapplytoomuchpressureonthemachine.
Letthemachinedothework.
● Switchoffthemachineandwaitforthemachine
tocometoacompletestandstillbeforeputting
themachinedown.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
removedustanddirtfromtheventilationslots.
● Regularlycleanthesandingpadtoavoid
inaccuraciesduringuse.

● Toremovetheoldsandingpaper(8),
proceedasdescribedinthesection
„Mountingandremovingthesandingpaper“.
● Tomountthenewsandingpaper(8),
proceedasdescribedinthesection
„Mountingandremovingthesandingpaper“.

Incaseofwear,thesandingpadmustbereplaced.
● Ifnecessary,removethesandingpaper.
● Loosenthescrews(10)fromthesandingpad
(3).
● Removetheoldsandingpad(3).
● Mountthenewsandingpad(3).
● Tightenthescrews(10)tothesandingpad(3).
WARRANTY
Consulttheenclosedwarrantyterms.
ENVIRONMENT
Disposal
Theproduct,theaccessories,andthepackaging
mustbesortedforenvironmentallyfriendly
recycling.

Donotdisposeofpowertoolsintodomesticwaste.
AccordingtotheEuropeanGuideline2012/19/EU
forWasteElectricalandElectronicEquipment
anditsimplementationintonationalright,power
toolsthatarenolongerusablemustbecollected
separatelyanddisposedofinanenvironmentally
friendlyway.
Theproductandtheusermanualaresubjectto
change.Specificationscanbechangedwithout
furthernotice.

Related product manuals