Need help?Do you have a question about the Fermator ECC+ 230 V and is the answer not in the manual?
General| Brand | Fermator |
|---|---|
| Model | ECC+ 230 V |
| Category | Control Unit |
| Language | English |
Illustrates the wiring for the motor, encoder, and thermal protection.
Shows connections for mains supply, battery, and various input signals.
Explains how to program the unit using DIP switches for working modes and motor/door types.
Details configuring floor level detection and input types via jumpers and switches.
Specifies the 230V AC single-phase power input and its operating range.
Describes using external voltage or volt-free contacts for door control.
Explains the purpose of specific inputs like Open, Common, Floor Level, and Battery.
Outlines the function of output relays to inform the lift controller about door status.
Explains the meaning of the Green LED indicating system status and its light patterns.
Details the color coding of the door status LED for open, closed, or alarm states.
Describes the serial switch connection for data transfer without impacting the electrical circuit.
Covers connections for safety switches, light curtains, and cabin push-buttons for reopening.
Explains the configuration for limit switches with and without motor encoders.
Details motor control, test pushbutton operation, and independent speed adjustments.
Covers the ON/OFF switch for mains supply and the serial port for external connections.
Lists power supply voltage, standby current, and PWM regulation parameters.
Provides motor voltage, power, enclosure class, speed, and thermal protection details.
Outlines input impedance, voltage range, and output contact ratings.
States compliance with EU directives, lists manufacturer, and issue date.
To Next Page
