Fermator VCI-VF5A.CD0 Series - Technical Reference Data

AUTOMATIC DOORS FOR LIFTS
14
VF5
POWER SUPPLY
• AC voltage range 230 V AC +10%, 15%
• Frequency supply 50...60 Hz
• Stand by power 50 mA 4 W
• Nominal power (PM motor) 0,21 A 20 W
• Maximum peak power 1,31 A 170 W
INVERTER
• Carrier frequency 16 KHz
• Frequency range 0,5...100 Hz
• Voltage range 40...200 V AC III
• Maximum output current 4 A
• Positional control Quadrature encoder
MOTOR VF
• Asynchronous triphasic 6 pole
• Voltage supply 230 V
• Power 250 W
• Nominal torque 1,5 N·m
• Nominal speed 900 RPM
• Thermic class F-155°C
MOTOR PM
• Synchronous permanent magnet 10 pole.
• Voltage supply 88 V
• Power 63 W
• Nominal torque 1 N·m
• Nominal speed 600 RPM
• Thermic class F-155°C
INPUTS
• Impedance 20 KΩ.
• Voltage 12 V DC...60 V DC
100 V DC...230 V AC
OUTPUTS
• Contacts Switched
• R. contact 50 mW
• Switch time 5 ms
• Output current Maximum: 150 mA
• Voltage 230 V AC
PERFORMANCE
• Open speed 200...700 mm/s
• Close speed 150...400 mm/s
• Max. acceleration 800...1.500 mm/s
2
• Safety force 60...150 N adjustable
• Maintenance torque (Opened door) 80 N/cm
REFERENCE DATA