Fermator VF5 User Manual

ENG
Assembly manual.
Automatic horizontal sliding car door.
Component: VF5 Electronic Module.
AUTOMATIC DOORS FOR LIFTS
MAN-MMCAENGV5TC-10.2017

Fermator VF5 Specifications

General

Brand	Fermator
Model	VF5
Category	Lifting Systems
Language	English

Summary

VF5 Electronic Module Connections

Motor and Encoder Connectivity

Power Supply and Emergency Connections

VF5 Programming: DIP Switch Settings

DIP Switch Configuration: 1 & 2 Inputs

Explains DIP switches for input modes (1 or 2 inputs).

DIP Switch Configuration: Automatic/Semiautomatic

DIP Switch Configuration: Rotation Sense

VF5 Advanced Programming and Inputs

DIP Switch Configuration: Master/Slave

Configuration of master or slave operation via DIP switch.

Door Operator Learning and Adjustment

Autoadjustment Process

Step-by-step guide for the door autoadjustment procedure.

Speed and Safety Potentiometer Settings

Information on setting speeds and safety force.

VF5 Programming Examples

Master Mode Example

Slave Mode Example

Autoadjustment and Testing Procedures

Learning Phase Preparation

Steps for preparing the controller and cables.

Autoadjustment Procedure Steps

Detailed steps for the door learning cycle.

Door Test and Verification

Troubleshooting and Lift Integration

Autoadjustment Troubleshooting

Common issues and solutions during autoadjustment.

Lift Controller Integration

Operation and Photocell Testing

Command Input and Potentiometer Adjustment

Photocell Functionality Test

Troubleshooting Specific Door Issues

Photocell Signal Problems

Door Movement Faults

Resolving issues like door not moving or partial closing.

Advanced Troubleshooting Scenarios

Skate and Obstruction Faults

Diagnosing issues with the skate and obstructions.

System Power and Control Faults

Troubleshooting power issues and signal obedience.