Need help?Do you have a question about the Fermax CITY LINE and is the answer not in the manual?
General| Power Supply | 12 Vdc |
|---|---|
| Operating Voltage | 12 Vdc |
| Audio Output | 1W |
| Microphone Sensitivity | -40dB |
| Type | Video Intercom |
| Frequency Response | 300Hz - 3.4kHz |
Covers installation and setup for MDS-DIRECT panels, including models and diagrams.
Details on programming decoders with 4-digit codes for residential zones.
Configuration of panel parameters like minimum time, talking time, and open door timing.
Setup procedures specific to MDS CITY panels, referencing their manual.
A swift and easy-to-use format of programming options and their corresponding pages.
Overview of programming parameters for access control functions.
Steps to access the Main Menu for programming.
Procedure to exit programming mode from any menu.
Option to erase all stored access codes in a single operation.
Selecting the required number of digits for user access codes (4, 5, or 6).
Procedure for entering new access codes for keypads.
Method to remove unwanted access codes from the system.
Steps to change an existing access code for a user.
How to check the total count of access codes stored in the system.
Process for modifying the secondary programming code.
A table for recording user access codes and related data.
Description and identification of components on outdoor panels.
Instructions on how to use the keypad for calls and door opening.
Information on different types of house terminals (telephone/monitor).
How to operate house terminals for calls, answering, and door opening.
To Next Page