Fermax DUOX PLUS VEO - User Manual

USER’S QUICK GUIDE: DUOX PLUS VEO MONITOR
USER’S QUICK GUIDE: DUOX PLUS VEO MONITOR
Cod. 970143Ic V05_23
CONTROL BUTTONS / LED
Digital menu for internal parameter settings and configuration.
(When the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-starting with
different panels. By sequentially pressing Panel 0, Panel 1, General
Panel, (depending on the available panels).
VEO monitor incorporates an OSD menu that is managed
via the monitor´s push buttons. The icons displayed are
managed with the corresponding buttons located on the
monitor.
The white line at the bottom of the icon indicates the function that is currently in effect.
Select with / the desired icon and confirm with .
USER MENU
F2
99
F2
99
1 2
4
5
3
Induction loop label. Located at the internal part of the receiver. (Depending on the model).
1 2
4
5
3
6
USER PARAMETER SETTINGS
Not
programmed
Standby Call
Called
Operation
LED
Do not
Disturb Mode
Red
Switched on
Slow blinking
Fast blinking
Red Led
1
1
Monitor volume settings
2
Do Not Disturb function
3
Display images
4
F2 Function
5
User parameter settings
1
Melody selection
2
Date and time settings
3
Enable/Disable image capture
4
User Reset
5
User help
6
Enable/Disable Doormatic
To perform a quick reboot of the terminal, press and hold the menu button for 10 seconds.

Fermax DUOX PLUS VEO Specifications