Fermax DUOX PLUS User Manual

DUOX PLUS BASIC RELAY
Reference: 3233
This relay allows the most basic and common
functions to be carried out: opening a door, activating
a light, etc.
For more advanced functions not available in this
relay, FERMAX has the DUOX PLUS relay...
DESCRIPTION
This relay allows the most basic and common functions to be carried out: opening a door, activating a light, etc.
For more advanced functions not available in this relay, FERMAX has the DUOX PLUS relay ref. 3267.
Programming is very simple, even if the factory default parameters are already the ones desired by the installer, you will not
even have to program anything. Just connect and that's it.
Using jumper JP1, the relay can be programmed as:
Block Relay (Default value: block = 00): Only the devices in that BLOCK can activate the relay (outdoor panels, guard unit or
monitors / telephones)
General Entrance Relay: All users of the installation can activate the relay.
The relay can be programmed to activate with the following actions :
Door opening.
F1 (default activation parameter).
F2
Call from the panel or concierge.
The relay activation time can also be programmed: [1 s, 99 s]. The factory default is 4 s.
CONNECTIONS
Bus Input: to connect the DUOX PLUS bus.

Fermax DUOX PLUS Specifications

General

Wiring	2-wire
Technology	Digital
Installation	Surface or flush mounting
Audio Frequency Response	300 Hz - 3400 Hz
Material	Plastic

Summary

Product Description and Features

Basic Relay Functionality

Explains the primary functions of the relay, such as opening doors and activating lights.

Programming Modes

Details the two operating modes: Block Relay and General Entrance Relay, configured via JP1.

Activation Triggers

Lists the actions that can trigger the relay, including door opening, F1, F2, and concierge calls.

Activation Time Configuration

Describes how the relay's activation duration can be programmed from 1 to 99 seconds.

Connection Details

Bus Input Connection

Specifies the connection point for the DUOX PLUS bus.

Technical Specifications and Components

Terminal Strip Functions

Details the purpose of terminal connections like Bs, +12, C, No, NC, and the ON LED.

Indicative LEDs

Explains the status indicated by the PWR (Red) and MODE (Blue) LEDs.

Product Characteristics

Covers power supply, consumption, operating temperature, humidity, and dimensions.