Pag 23
Answer call from an indoor panel (panel decoder )
1. The visitor calls from the panel by pressing the "CON-
CIERGE" key. The Guard Unit starts to "beep" and the
LED and icon blink.
Three digits on the display indicate the panel and
block number the call is made from.
Example: Call made from nº 2 in block nº 4.
2. To answer the call, pick up the handset and press
the Concierge-Panel Decoder button.
The display indicates PANEL-GUARD UNIT commu-
nication.
CP
Bip
Bip...
!
3. If you want to open the door, press the Door Lock key,
while "PANEL-CONCIERGE communication" appears on
the display (If it does not appear, press the Concierge-
Panel Decoder button again)
D :01/01
04 002 18:15
NOTE: If there is more than one of the same type of call pending an
answer, from either telephone or panel, the system stores them in the
corresponding call queues. Management is explained in the section:
"CALL QUEUES ".
[ ]
04 002/ 01
4. To end communciation with the panel, press the Hash
button.
To Next Page
Loading...
