3.2.4. Direct Dialing - Memories
After making changes use the save changes button.
1. telephone number up to 16 digits, we want to store. The numbers are the
numbers of the first group or numbers of Day mode. In default setting is table
memoirs empty. While using setting P2P to the memoirs saves IP address e.g .
192*168*1*250, where "*" means "." , while using SIP proxy server to the
memoirs saves phone number e.g. 117, * represents a character * in the
telephone number. In both modes, you can specify a special number ***1 or
***2 to close 1st. or 2nd. relay. This feature in addition to the direct activation
the relay by button and still possible to use for connecting RFID readers or the
exit button.
2. telephone number up to 16 digits, we want to store. The numbers are the
numbers of the second group or numbers of Night mode. In default setting is
table memoirs empty. While using setting P2P to the memoirs saves IP address
e.g . 192*168*1*250, where "*" means "." , while using SIP proxy server to the
memoirs saves phone number e.g . 117, * represents a character * in the
telephone number. In both modes, you can specify a special number ***1 or
***2 to close 1st. or 2nd. relay. This feature in addition to the direct activation
To Next Page
Loading...
