Do you have a question about the Fermax PRIVATE and is the answer not in the manual?
Brand | Fermax |
---|---|
Model | PRIVATE |
Category | Intercom System |
Language | English |
Covers the installation of the power supply unit for the system.
Steps for mounting and connecting the external door panel.
Details on adjusting audio levels, language, and camera focus.
Instructions for physically mounting and connecting the indoor monitor.
Steps to program the monitor, including call tone selection.
Visual representation of how to connect system components.
Information on the pre-wired connections within the outdoor panel.
Specifications and technical details of the system components.
Options for expanding the system with additional devices.
How to connect an extra telephone for call reception.
How to add a call extension module for remote call reception.
Using a relay to control external lighting for low-light conditions.
Using a relay to control a second door opening.
Connecting the monitor to a television for video display.
Wiring for adding multiple extensions or an extra monitor.
Explains how the card reader operates and its programming modes.
Steps to activate the card reader using the MASTER card.
Procedure to reset or change the MASTER card.
Guide on enrolling new access cards into the system.
Steps to remove existing access cards from the system.
Setting the duration the door release remains active.
Setting the time before an alarm sounds for an open door.
Restoring the card reader to its original factory settings.
Overview of the LOFT monitor's features and design.
Explanation of the functions of each button on the monitor.
General guide on using the videoportero system.
How to initiate a call to the outdoor panel.
How to receive and respond to incoming calls.
Procedure for granting access to visitors.
Steps for manually turning the monitor on or activating features.
Details on automatic activation of the second camera.
How to use the system for door access with activated cards.