EasyManua.ls Logo

Ferrofish PULSE16 DX - Technical Specifications; Interface and Converter Specifications

Ferrofish PULSE16 DX
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
ADAT I/O: 4 + 4 optical ports
16 channels @32kHz, 44.1kHz, 48kHz
16 channels @64kHz, 88.2kHz, 96kHz
8 channels @128kHz, 176.4kHz, 192kHz
Latency: 2 samples
MADI I/O: SFP cage for MADI single-mode or multi-mode SFP module
(AES10) 64 channels @32kHz, 44.1kHz, 48kHz
32 channels @64kHz, 88.2kHz, 96kHz
16 channels @128kHz, 176.4kHz, 192kHz
MIDI-over-MADI implemented
Latency: 2 samples
Wordclock: 2 x BNC: In / Out
Switchable input termination of 75 ohms
MIDI I/O: MIDI Standard 1.0 / 1996
2 x 5pin I/O port for remote control
Translation from MIDI to MIDI over MADI possible.
A/D converter: 2 x 24 Bit Analog / Digital Converter
outputs: 16 x TRS ¼” (6.3mm), female
(analog) Digital gain: +20dBu...-8dBu in single steps of 1dB
Latency: @48kHz: 12/fs, 0.25ms, @96kHz: 9/fs, 0.09ms,
@192kHz: 5/fs, 0.03ms
D/A converter: 2 x 24 Bit Digital / Analog Converter
inputs: 16 x TRS ¼(6.3mm), female
(analog) Digital sensitivity: +20dBu...-8dBu in single steps of 1dB
Latency: @48kHz: 7.8/fs, 0.16ms, @96kHz: 5.4/fs, 0.06ms,
@192kHz: 6.6/fs, 0.03ms
Op-Amps: RC4580
Display: 2 x Color-TFT Display

Related product manuals