Need help?Do you have a question about the Ferrofish PULSE16 DX and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Type | AD/DA Converter |
| AD/DA Resolution | 24-bit |
| Digital Inputs | ADAT, MADI |
| Digital Outputs | ADAT, MADI |
| Word Clock I/O | 1 x In, 1 x Out |
| Power Supply | External 12V DC |
| Dimensions | 482 x 44 x 200 mm |
| Analog Inputs | 16 x TRS |
| Analog Outputs | 16 x TRS |
| USB | No |
| ADAT I/O | 4 x ADAT I/O (TOSLINK) |
| Sample Rates | 44.1 kHz to 192 kHz |
Comprehensive safety guidelines for device operation, installation, and handling to prevent hazards.
Lists package contents, explains manual symbols, and directs to website for software updates.
Details on operating the PULSE16 DX using front panel buttons and understanding the main screen status bar.
Guides on adjusting headphone volume and selecting audio sources and channels for monitoring.
Configure wordclock source (Master/Slave) and sample frequency.
Set sensitivity for each of the 16 analog inputs individually.
Adjust the signal level for each of the 16 analog outputs.
Define signal flow between inputs and outputs using an intuitive matrix.
Access information about the installed MADI SFP module and its parameters.
Control various operational settings and parameters of the PULSE16 DX.
Load, save, and manage configurations across six preset slots.
Describes function and use of Master, ADAT/MADI, BNC, and Dante as wordclock sources.
Explains SMUX/1, SMUX/2, and SMUX/4 modes and their impact on channel count at different sample rates.
Set sensitivity for 16 analog inputs from -8dBu to +20dBu in 1dB steps.
Adjust level for 16 analog outputs from -8dBu to +20dBu in 1dB steps.
Instructions for using the routing matrix to connect inputs and outputs in blocks of eight channels.
Details on the optical MADI SFP module, its parameters, and available versions.
Configure BNC termination, toggle keyclick, and adjust display brightness.
Configure MADI frames, set delay compensation, and specify MIDI control sources.
Instructions for loading and storing settings (Gains, Levels, Routing) into six preset slots.
How to lock the front panel using a PIN and advice on saving the PIN.
Details on 16 analog I/O, connector type, sensitivity, and pinout.
Information on ADAT interface capabilities, ports, channel counts, and cable limits.
Explains MADI standards, channel counts, daisy-chaining, and the MADI-SFP connector.
Details on BNC connectors for clock generation/reception and jitter reduction.
Covers 5-pin MIDI I/O port and Dante network audio protocol for routing.
Explains controlling the PULSE16 DX via RemoteFish App over MIDI, MIDI-over-MADI, or Dante.
Parameters for ADAT, MADI, MIDI I/O, and A/D, D/A converters.
Details on headphones, PLL, clock, fuse, power, dimensions, weight, temperature, and humidity.
Details regarding compliance with EMC, RoHS, and FCC regulations.
Guidelines for responsible disposal (WEEE) and information on device serviceability.
Details on product warranty, terms, conditions, and exclusion of liability.
To Next Page
