Need help?Do you have a question about the Ferrofish A16 MK-II and is the answer not in the manual?
Displays input/output levels, sample rate, and interface routing status.
Pre-configured routing options for MADI and ADAT signal conversion.
Details on MADI interface, bandwidth, and channel capacity at different frequencies.
Information on ADAT interface, channel count, and frequency dependent channel reduction.
Using Wordclock (BNC) for synchronizing multiple devices and its input/output functionality.
Adjusting analog input/output levels and gains independently in 0.5dB steps.
General| Type | AD/DA Converter |
|---|---|
| Channels | 16 |
| Bit Depth | 24-bit |
| Analog Inputs | 16 |
| Analog Outputs | 16 |
| Digital Inputs | ADAT |
| Digital Outputs | ADAT |
| Sample Rate | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Clock Source | Internal |
| Word Clock | BNC In/Out |
| Connectivity | USB |
| Power Supply | 12V DC |
To Next Page
